martedì 19 novembre 2013

Tubi freno per YAMAHA MT 09 2014 / YAMAHA MT 09 2014 Brake lines / Latiguillos freno



The photo shows Fren Tubo type 2 hose kit, which has the following characteristics:

304 stainless steel hose, PTFE braiding and PA  coating.


The kit is composed of 3 hoses; the unions are as per the conformation of the standard ones and there no assembly modifications are foreseen.




The hose kit is available in the following variants of materials and colours: 

TYPE 1
Stainless steel braided hose with steel end fittings (480 hours of resistance to rust, accordingly to DIN ISO 4628-3 Standard) and with steel bolts as completion.
The hose is also available transparent, grey, black, blue, red, yellow, white, green or orange covered.

TYPE 2
Stainless steel braided hose with anodized alloy end fittings.
The hose is also available transparent, grey, black, blue, red, yellow, white, green or orange covered.
Standard fittings colourings are: red bushings, blue fittings and red bolts as completion.
Upon request , the fittings are available also in a uniform red, blue or black colour version, as per customer’s preference.

TYPE 3
Kevlar® braided hose with blue colour covering and anodized alloy end fittings.
The hose is also available red, yellow, black, green, orange, white covered and the end fittings in a uniform red, blue or black colour.
Standard fittings colourings are: red bushings, blue fittings and red bolts as completion.
Upon request , the fittings are available also in a uniform red, blue or black colour version, as per customer’s preference.

TYPE 4
Double carbon fiber braided hose and anodized alloy end fittings.
Standard fittings colourings are: stainless steel bushings, black fittings and black bolts as completion.
Upon request , the fittings are available also in a uniform red, blue or black colour version, as per customer’s preference.

All the versions are TÜV approved.


Fren Tubo produces only and exclusively in the Factories situated in Casalecchio di Reno (Bologna) and Fürth (Germany) and does never consent to the outsiders to assembly proper parts.

Fren Tubo products can always be easily traced because they bring Fren Tubo name marked on each fixing bushing (as per specific Standards for brake lines).

Since Fren Tubo uses softer washers, torque for the socket-head screws is different from the ones of the vehicle manufacturers and should never exceed 17 Nm for the aluminium screws and 22 Nm for the steel ones.